Mounting the LG T1 Transparent
in Tampa Bay.

What you need to know about the LG T1 Transparent.

The LG T1 Transparent is one of the LG models we mount most often in Tampa Bay. Rollable transparent — first-of-kind. Retail pricing for new units runs $60,000+ depending on size, with the 77-inch as entry and the 77-inch as flagship.

Specifications relevant to mounting

• Available sizes: 77"
• VESA mount pattern: 300x300 mm (this is the bolt-hole spacing on the back of the TV — every mount must match)
• Weight (no stand): approximately 30 lbs for typical 65" size
• Mount tier in our pricing: Standard $99 + bracket — see service page

Specialty install: the LG T1 Transparent rollable is a one-of-a-kind product — we coordinate directly with LG concierge service if you have one. Custom pricing.

Recommended bracket for the LG T1 Transparent.

For the LG T1 Transparent, we recommend a full-motion ($95-120) with extended reach for swivel. This matches the TV's weight and gives you the right movement range for typical Tampa living-room layouts.

Specifically, our top picks for this TV:

• Sanus VLT series — premium build, smooth motion, lifetime warranty. $200-300.
• Kanto PMX series — mid-range, reliable. $150-220.
• Echogear EGLF2 — budget option that still meets weight rating. $95-120.

If you've already bought a mount, send us a photo of the box — we'll verify it's rated for your TV before we drive out. We bring our own as backup.

The Tampa-specific install considerations.

Tampa Bay has three wall types we encounter constantly, and each requires different hardware for the LG T1 Transparent:

• Drywall over wood studs (interior walls): Standard 5/16" lag bolts into studs. Easy. Most common.
• Concrete-block (CBS) walls (exterior walls in 80% of Tampa homes): 1/2" sleeve anchors drilled into the block, going through 3/4" furring strip first. Full anchor guide here.
• Brick or stucco-on-block: Lag-shield expansion anchors in mortar joints (never the brick face).

Heavier TVs like the LG T1 Transparent (30 lbs) demand stricter anchor strategy — a single drywall anchor will not hold this TV. We always anchor into structural elements (studs, concrete block, mortar joints), never drywall alone.

Cable concealment for the LG T1 Transparent.

The LG T1 Transparent typically has 4-6 cable connections (HDMI 2.1 ×2, eARC, USB, power, ethernet for Wi-Fi 6E models). Our standard wire concealment includes:

• In-wall HDMI 2.1 cable (CL3-rated) fished through the wall cavity, supporting 4K 120Hz / 8K 60Hz signals
• Code-rated PowerBridge or Datacomm recessed outlet kit behind the TV — feeds power from existing nearby outlet through the wall
• Brush plates at TV-end and console-end so cables exit cleanly with no holes

For the LG T1 Transparent, this is the $50 upgrade over standard install ($99 → $149).

How long does it take?

Average install time for the LG T1 Transparent (77" size, drywall, with hidden wires): 60-90 minutes. Larger sizes (77") add 15-30 min for the lift moment. Brick or concrete walls add 20-30 min for masonry drilling.

Common mistakes we see (DIY warning).

• Wrong VESA pattern — buying a mount that says "fits up to 77-inch" without checking the actual pattern. The LG T1 Transparent uses VESA 300x300, which is more specific than mount marketing copy implies.
• Anchoring into drywall only — works for two weeks, then the TV gradually pulls free as the anchor crushes the drywall.
• Solo lift — even the smaller 77-inch is awkward. Drop damage on a LG OLED voids the warranty (it's "physical damage," not a manufacturing defect).
• Skipping the heat test for above-fireplace installs — see our fireplace mount guide.

Get the LG T1 Transparent mounted today.

Text us a photo of your LG T1 Transparent (front and back) and your wall, and we'll quote a flat-rate within 10 minutes. Most LG T1 Transparent installs are Standard $99 + bracket. Same-day install if you book by 1pm Tampa time.

Get Quote for My LG T1 Transparent