Mounting the LG M4 Wireless
in Tampa Bay.

What you need to know about the LG M4 Wireless.

The LG M4 Wireless is one of the LG models we mount most often in Tampa Bay. Wireless OLED — needs special install. Retail pricing for new units runs $5,000-30,000 depending on size, with the 65-inch as entry and the 97-inch as flagship.

Specifications relevant to mounting

• Available sizes: 65", 77", 83", 97"
• VESA mount pattern: 300x300 mm (this is the bolt-hole spacing on the back of the TV — every mount must match)
• Weight (no stand): approximately 30 lbs for typical 65" size
• Mount tier in our pricing: Standard $99 + bracket — see service page

Wireless TV: the LG M4 needs careful planning for the Zero Connect Box placement (15-30 ft line-of-sight to TV). We work this out during the pre-arrival photo intake.

Recommended bracket for the LG M4 Wireless.

For the LG M4 Wireless, we recommend a full-motion ($95-120) with extended reach for swivel. This matches the TV's weight and gives you the right movement range for typical Tampa living-room layouts.

Specifically, our top picks for this TV:

• Sanus VLT series — premium build, smooth motion, lifetime warranty. $200-300.
• Kanto PMX series — mid-range, reliable. $150-220.
• Echogear EGLF2 — budget option that still meets weight rating. $95-120.

If you've already bought a mount, send us a photo of the box — we'll verify it's rated for your TV before we drive out. We bring our own as backup.

The Tampa-specific install considerations.

Tampa Bay has three wall types we encounter constantly, and each requires different hardware for the LG M4 Wireless:

• Drywall over wood studs (interior walls): Standard 5/16" lag bolts into studs. Easy. Most common.
• Concrete-block (CBS) walls (exterior walls in 80% of Tampa homes): 1/2" sleeve anchors drilled into the block, going through 3/4" furring strip first. Full anchor guide here.
• Brick or stucco-on-block: Lag-shield expansion anchors in mortar joints (never the brick face).

Heavier TVs like the LG M4 Wireless (30 lbs) demand stricter anchor strategy — a single drywall anchor will not hold this TV. We always anchor into structural elements (studs, concrete block, mortar joints), never drywall alone.

Cable concealment for the LG M4 Wireless.

The LG M4 Wireless typically has 4-6 cable connections (HDMI 2.1 ×2, eARC, USB, power, ethernet for Wi-Fi 6E models). Our standard wire concealment includes:

• In-wall HDMI 2.1 cable (CL3-rated) fished through the wall cavity, supporting 4K 120Hz / 8K 60Hz signals
• Code-rated PowerBridge or Datacomm recessed outlet kit behind the TV — feeds power from existing nearby outlet through the wall
• Brush plates at TV-end and console-end so cables exit cleanly with no holes

For the LG M4 Wireless, this is the $50 upgrade over standard install ($99 → $149).

How long does it take?

Average install time for the LG M4 Wireless (65" size, drywall, with hidden wires): 60-90 minutes. Larger sizes (97") add 15-30 min for the lift moment. Brick or concrete walls add 20-30 min for masonry drilling.

Common mistakes we see (DIY warning).

• Wrong VESA pattern — buying a mount that says "fits up to 97-inch" without checking the actual pattern. The LG M4 Wireless uses VESA 300x300, which is more specific than mount marketing copy implies.
• Anchoring into drywall only — works for two weeks, then the TV gradually pulls free as the anchor crushes the drywall.
• Solo lift — even the smaller 65-inch is awkward. Drop damage on a LG OLED voids the warranty (it's "physical damage," not a manufacturing defect).
• Skipping the heat test for above-fireplace installs — see our fireplace mount guide.

Get the LG M4 Wireless mounted today.

Text us a photo of your LG M4 Wireless (front and back) and your wall, and we'll quote a flat-rate within 10 minutes. Most LG M4 Wireless installs are Standard $99 + bracket. Same-day install if you book by 1pm Tampa time.

Get Quote for My LG M4 Wireless